Vermietung - Paket - Beschallungssystem CODA AUDIO APS/SCV-F 2/4

Type:

3-way Arrayable Point Source

Frequency response:

50 Hz – 22 kHz (-6 dB)

Power handling:

Low AES peak:

1200 W / 4800 W

Mid / High AES / peak:

150 W / 1300 W

Sensitivity:

Low 1 W / 1 m:

100 dB

Mid / High 1 W / 1 m:

111 dB

Maximum peak SPL (with LINUS14)

Low:

137 dB

Mid / High:

146 dB

Amplification, Cabinets per Amplifier:

LINUS10-C Optimum / Maximum:

8/12

LINUS14D Optimum / Maximum:

8/12

LINUS10 Optimum / Maximum:

4/8

Dispersion horizontal:

120°, 90°, 60° or 105° (45°+60°); 90° (30°+60°); 75° (30°+45°)

Dispersion vertical:

20°

Components:

Low frequency:

2x 10″ neodymium, water resistant cones 3″ (77 mm) voice coil, 600 W (AES) each

Mid / High frequency:

9″ coaxial neodymium 20° Curved-wave-driver

Mid:

3.5″ (90 mm) voice coil, 150 W (AES)

High:

1.75″ (44.4 mm) voice coil, 80 W (AES)

Crossover point:

500 Hz, 6300 Hz passive

Input connectors:

2x Neutrik™ NL4MP

Nominal impedance:

8 Ω (+2/-2)

Enclosure material:

Birch plywood

Finish:

Polyurea coating (water resistant)

Flying hardware:

Integrated

Type:

Sensor controlled subwoofer

Application:

Compact subwoofer

Frequency response:

25 Hz (-6 dB) to 150 Hz

Power handling (AES / peak):

1500 W / 6000 W

Sensitivity 1 W / 1 m:*

97 dB

Maximum output peak:**

138 dB

Amplification, Cabinets per Amplifier:

LINUS14D Optimum / Maximum:

8/12

LINUS10 Optimum / Maximum:

4/8

Components:

18″ neodymium ultra low distortion woofers 4″ (101.6 mm) voice coil, 1500 W (AES) each

Nominal impedance:

8 Ohm (+1/-1)

Input connectors:

2x NeutrikTM NL4MP (rear) + 1x NeutrikTM NL4MP (front)

Velocity sensors output:

NeutrikTM NC3MAV (rear) + NeutrikTM NC3MAV (front)

Suspension:

Flying hardware integrated, allows curving (0°, 2.5°, 5°)

Enclosure material:

Birch plywood

Finish:

Polyurea black coating (water resistant)

GENERAL

Channels

4 inputs (analog, LiNET, DANTE) routable to any of the 4 outputs

AUDIO

Input impedance (balanced)

12 kΩ

Max. input level (balanced, THD 1%)

+18 dBu / 6.15 Vrms

Output noise (analog input)

< -108 dB (unweighted) / -111 dB (A-weighted)

Output noise (digital input)

< -116 dB (unweighted) / – 119 dB (A-weighted)

Frequency response (@ 8 Ω load, w/o preset setting)

20 Hz – 20 kHz (0/-1 dB)

THD+N, IMD (20 Hz – 20 kHz)

< 0.005%, 4 Ohms P/2

Damping Factor (@ 8 Ω load, 1 kHz and below)

> 2500

DSP

Inputs

4x

Outputs

4x

Processor

Analog Devices Sharc DSP

Sampling rate

96 kHz / 32 bit floating point

Presets

110 Factory and 20 User presets

OUTPUT POWER

Peak power / 6 dB Crest Factor on each channel

8 Ω

4x 3600 W

4 Ω

4x 7000 W

2 Ω

4x 5200 W

RMS POWER

8 Ω

4x 1800 W

4 Ω

4x 3500 W

2 Ω

4x 2600W

Output Circuitry

Class D

FRONT PANEL

Power on/off switch

yes

Display

yes

Mute buttons

each channel

Menu buttons

provide front panel control

Signal, Clip, Protect LEDs

each channel

Comparator LEDs

4x – disconnected sensor (red)

Input signal detection LEDs

analog, LiNET, DANTE

Ethernet LED

yes

Standby LED

yes

REAR PANEL

Balanced analog inputs

4x XLR/F

LiNET input

RJ45

LiNET daisy-chain link

RJ45

LINUS Control (User interface)

RJ45 (Ethernet)

LINUS Control (daisy-chain link)

RJ45 (Ethernet)

DANTE input

RJ45

AUX

RJ45

Sensor inputs

2x XLR/F – 5Pol

Amplifier outputs

2x NL4, 1x NL8

Mains

Neutrik™ powerCON 32A

MAINS POWER

Main

Dual-voltage SMPS with automatic voltage selection

230V

165 – 264 V (47-63 Hz)

120V

85 – 132 V (47-63 Hz)